The hydrogenation of sequestrated CO2 to methanol can reduce CO2 emission and establish a sustainable carbon circuit. However, the transformation of CO2 into methanol is challenging because of the thermodynamic equilibrium limitation and the deactivation of catalysts by water. In the present work, different reactor types have been evaluated for CO2 catalytic hydrogenation to methanol. Best results have been obtained in a bifunctional catalytic membrane reactor (CMR) based on a zeolite LTA membrane and a catalytic Cu-ZnO-Al2 O3 -ZrO2 layer on top. Due to the in situ and rapid removal of the produced water from the catalytic layer through the hydrophilic zeolite LTA membrane, it is effective to break the thermodynamic equilibrium limitation, thus significantly increasing the CO2 conversion (36.1?%) and methanol selectivity (100?%). Further, the catalyst deactivation by the produced water can be effectively inhibited, thus maintaining a high long-term activity of the CMR.Atrial fibrillation (AF) with concomitant heart failure (HF) poses a significant therapeutic challenge. Mechanism-based approaches may optimize AF therapy. Small-conductance, calcium-activated K+ (KCa , KCNN) channels contribute to cardiac action potential repolarization. KCNN1 exhibits predominant atrial expression and is downregulated in chronic AF patients with preserved cardiac function. Epigenetic regulation is suggested by AF suppression following histone deacetylase (HDAC) inhibition. We hypothesized that HDAC-dependent KCNN1 remodeling contributes to arrhythmogenesis in AF complicated by HF. The aim of this study was to assess KCNN1 and HDAC1-7 and 9 transcript levels in AF/HF patients and in a pig model of atrial tachypacing-induced AF with reduced left ventricular function. In HL-1 atrial myocytes, tachypacing and anti-Hdac siRNAs were employed to investigate effects on Kcnn1 mRNA levels. KCNN1 expression displayed side-specific remodeling in AF/HF patients with upregulation in left and suppression in right atrium. In pigs, KCNN1 remodeling showed intermediate phenotypes. HDAC levels were differentially altered in humans and pigs, reflecting highly variable epigenetic regulation. Tachypacing recapitulated downregulation of Hdacs 1, 3, 4, 6, and 7 with a tendency towards reduced Kcnn1 levels in vitro, indicating that atrial high rates induce remodeling. Finally, Kcnn1 expression was decreased by knockdown of Hdacs 2, 3, 6, and 7 and enhanced by genetic Hdac9 inactivation, while anti-Hdac 1, 4, and 5 siRNAs did not affect Kcnn1 transcript levels. In conclusion, KCNN1 and HDAC expression is differentially remodeled in AF complicated by HF. Direct regulation of KCNN1 by HDACs in atrial myocytes provides a basis for mechanism-based antiarrhythmic therapy.Lignin has emerged as an attractive alternative in the search for more eco-friendly and less costly materials for enzyme immobilization. In this work, the terephthalic aldehyde-stabilization of lignin is carried out during its extraction to develop a series of functionalized lignins with a range of reactive groups (epoxy, amine, aldehyde, metal chelates). https://www.selleckchem.com/products/AZD1152-HQPA.html This expands the immobilization to a pool of enzymes (carboxylase, dehydrogenase, transaminase) by different binding chemistries, affording immobilization yields of 64-100?%. As a proof of concept, a ω-transaminase reversibly immobilized on polyethyleneimine-lignin is integrated in a packed-bed reactor. The stability of the immobilized biocatalyst is tested in continuous-flow deamination reactions and maintains the same conversion for 100 cycles. These results outperform previous stability tests carried out with the enzyme covalently immobilized on methacrylic resins, with the advantage that the reversibility of the immobilized enzyme allows recycling and reuse of lignin beyond the enzyme inactivation. Additionally, an in-line system also based on lignin is added into the downstream process to separate the reaction products by catch-and-release. These results demonstrate a fully closed-loop sustainable flow-biocatalytic system based exclusively on lignin.Synthesis of supramolecular block co-polymers (BCP) with small monomers and predictive sequence requires elegant molecular design and synthetic strategies. Herein we report the unparalleled synthesis of tri-component supramolecular BCPs with tunable microstructure by a kinetically controlled sequential seeded supramolecular polymerization of fluorescent π-conjugated monomers. Core-substituted naphthalene diimide (cNDI) derivatives with different core substitutions and appended with β-sheet forming peptide side chains provide perfect monomer design with spectral complementarity, pathway complexity and minimal structural mismatch to synthesize and characterize the multi-component BCPs. The distinct fluorescent nature of various cNDI monomers aids the spectroscopic probing of the seeded growth process and the microscopic visualization of resultant supramolecular BCPs using Structured Illumination Microscopy (SIM). Kinetically controlled sequential seeded supramolecular polymerization presented here is reminiscent of the multi-step synthesis of covalent BCPs via living chain polymerization. These findings provide a promising platform for constructing unique functional organic heterostructures for various optoelectronic and catalytic applications.Both one-pot catalytic conversion of furfural (FAL) to isopropyl levulinate (PL) and carbonization of by-product (humins) for electromagnetic wave absorption are discussed, which provides inspiration that humins can be applied to electromagnetic wave absorption. In the former, phosphotungstic acid (PW) is employed as a homogeneous catalyst to convert FAL to PL via a tandem reaction in one pot, with the formation of a vast amount of humins. With FAL and various intermediates as substrates, it was found that humins was a polymerization product of FAL, furfuryl alcohol (FOL) and furfuryl ester (FE) with furan rings. In addition, the in?situ attenuated total reflection infrared (ATR-IR) spectra also provided a basis for the proposed reaction route. In the latter, with the humins as raw material, P species and WO3 doped nano-porous carbon (Humins-700) platform formed after high-temperature annealing is used for electromagnetic wave absorption and manifests desirable absorption performance. The minimum reflection loss (RLmin ) value is -47.